3月17日,澳洲認證機構SAA Approvals通過郵件通知發布了澳大利亞及新西蘭標準對測試報告中照片的要求,詳見如下:
Photos/照片
The required standard of test report photos in Australia and New Zealand is higher than international norms.
澳大利亞及新西蘭標準對測試報告中的照片的要求要高于國際標準。
SAA Approvals follow the photo requirements from the Equipment Safety Rules:
SAA Approvals遵循電氣設備安全準則中對于照片的要求:
Test Reports must include detailed color photographs. The photographs generally should include:
測試報告必須包含詳細的彩色照片。這些照片通常需包括以下這些內容:
1、Complete view of the product (external side, top and bottom);
產品整體視圖(外觀、頂部及底部);
⒉、Name plate of product;
產品名稱銘牌;
⒊、Other warning labels on product or indicator marks;
產品的其他警示銘牌或者指示標識;
⒋、Close-up of controls and switches;
控制裝置及開關的局部特寫視圖;
⒌、Close-up of plug (including markings) or a copy of a relevant Certificate of Conformity;
插頭(包括標識部分)的局部特寫視圖,或者相關合規證書復印件;
⒍、Cord markings or a copy of a relevant Certificate of Conformity;
電線標識或者相關合規證書復印件;
⒎Cord entry into product;
產品電線接入口;
⒏、Internal overall layout including wiring and component locations;
內部整體視圖,需包括布線方式及元器件的位置;
⒐、Close-up of incoming supply cord/cord anchorage/supply terminal block/earth connection;
電源線接入/電線錨位/電源接線端子/接地連接的局部特寫視圖;
10、Marking on critical components (switches, capacitors, transformers etc).
關鍵元器件的標識(開關、電容、變壓器等等)。
Important Notice/重要事項
⒈、If any of these items are missing, the report cannot be accepted by law.
如果遺漏了以上任何一項,那么該測試報告是不被法律認可的。
⒉、If the photos are blurry, SAA Approvals cannot accept them.
如果照片模糊,SAA Approvals將無法接受這份測試報告。
⒊、If the critical components in the test report table are not in the photos, including their marking, SAA Approvals cannot accept the report.
如果測試報告中的關鍵元器件及其標識沒有包括在照片中,SAA Approvals將無法接受這份測試報告。
Top Tip/建議
Put all the photos in a separate test report document and reference it in the main test report. Zip it before you upload the file to SAA to ensure a smooth transfer of the file, or use Wetransfer or Dropbox services to get the photos to us.
將所有照片保存在一份單獨的測試報告文件中,并在主報告中引用此文件。將文件壓縮之后再發送給SAA Approval以確保其能夠順利傳輸,或者您可以使用Wetransfer或Dropbox來傳送照片。
我們秉承科學嚴謹?shù)墓ぷ鲬B(tài)度,以客戶為中心,高效統籌安排測試計劃,竭力縮短測試時間的周期,為客戶提供快捷、公正的第三方咨詢檢測等服務。如您有相關產品需要咨詢,歡迎您直接來電18165787025、4000-1998-38咨詢我司工作人員,獲得詳細的費用報價與周期方案等信息,深圳訊科期待您的光臨!
相關主題:強制性產品認證目錄, cpsc認證, CB認證, 歐盟rohs認證, 第三方檢測報告, rohs檢測報告, 哪些產品需要ce認證, 鹽霧試驗判定標準, KC認證, rohs是什么
上一篇:臺灣BSMI官方發布ITAV類產品認證標準更新公告!
下一篇:001009熔斷電阻安全CQC認證實施規則換版通知
- 手術無影燈照度均勻性測試(50000h后)
- 訊科解讀:注射泵阻塞報警壓力全量程測試要點與規范
- 訊科技術剖析:電子體溫計探頭響應時間測試(35-42℃)的專業方法論與應用價值
- 血氧飽和度探頭光路偏移測試(機械沖擊后)
- 訊科標準檢測:血壓計袖帶粘扣剝離強度 1000 次測試規范解析
- 訊科檢測解析:輸液泵流量精度測試(全流速范圍)的意義與方法
- 訊科技術聚焦:醫用監護儀心電導聯線5萬次抗彎折測試解析與可靠性評估
- 超聲波探頭聲透鏡耦合劑浸泡老化測試與可靠性評估——訊科標準檢測
- 訊科檢測:滑雪鏡鏡片冷熱交替防霧測試技術解析
- 訊科技術解析:潛水手電筒100米深度壓力測試與密封可靠性評估



